Attributes |
Contains list of available member attributes describing Mechanical components. |
Display for Selected Attribute |
When on, the selected attribute's settings become active. |
Position |
Controls the location of the label relative to the resymbolized component.
- % of member length - Applies a percentage to locate the label along the length axis of the resymbolized component. The value is calculated from the start point (end 1) of the component.
- Distance from end 1 - Applies a numeric value to locate the label along the length axis of the resymbolized component. Value is calculated from the start point (end 1) of the component.
- Distance from end 2 - Applies a numeric value to locate the label along the length axis of the resymbolized component. Value is calculated from the end point (end 2) of the component.
|
Above/Below (label placement) |
Controls label's center line offset distance by selecting a direction and entering a value. Selecting Above places the label above the resymbolized component. Selecting Below places the label below the resymbolized component. |
x Text Height |
Used to enter a numeric value to set a label offset for placement above or below resymbolized component based on the label's text height. |
Text Style |
Selects an available text style for labels. Use the Text Styles tool to load or create text styles. |
Height |
Used to enter a numeric value for label text height. |
Width |
Used to enter a numeric value for label text width. |
Font |
Selects an available font for labels. |
Justification |
Sets the alignment of the text used in the label. The setting is independent of the label offsets. |
Level |
Sets the level for labels. |
Color |
Sets the color for labels. |
Weight |
Sets the line weight for labels. |
Format |
Allows for user defined notes to be added when label is created. There are no restrictions to what can be typed in this field. The drawing rule generated attribute label is parenthesized by the expression < %VALUE% >. Two part dimension labels are separated < %VALUE% x %VALUE% >. The format also supports a %SHAPE% keyword. When required, pre-pending or appending the string with %SHAPE% adds the shape symbol to the resulting string. Rectangular ducts do not have a symbol. |